PRODUCT INFORMATION SHEET
 PRODUCT DESCRIPTION
Moisture Shield™ is a durable encapsulate that hides staining & discoloration. Once the coating cures it resists additional staining, discoloration and odors that typically occur on
surfaces exposed to high humidity and insufficient airflow. One coat makes an excellent primer on concrete and concrete block. Pigment can be added to a second coat to finish a basement living
space.
BENEFITS
- High solids product. Contains over 43% solids.
- Provides a durable, water-resistant coating.
- Latex primer / sealer for concrete, concrete block, and all masonry products.
- Coatings protect materials from moisture-related damage.
- Dries quickly on most surfaces.
- Effective over a broad pH range (3-11).
- Interior / Exterior stain blocking by inhibiting microbial growth on the coating surface*.
- Provides UV protection on exterior surfaces.
- Covers dried water stains.
- Assures uniform appearance.Prepares most surfaces with one coat.
- Easy clean up with water.
- *Contains an antimicrobial registered with the EPA for this use and meets the guidelines under the “treated article exemption” 40 CFR 152.25.
APPLICATION
Apply to clean dry surfaces only! Remove all dirt and debris prior to application. If stains are present, clean thoroughly with EnzyMagic 91™ or All-Clean™ and allow surface to dry prior
to applying the coating. Applying product to wet or dirty surfaces will dilute the product, inhibit adhesion and reduce its effectiveness.
Roller
No reduction necessary. Use a ¼” – ¾” nap synthetic roller cover
Brush
No reduction necessary. Use nylon/polyester brush
Coverage
200-400 sq. ft./gallon
Drying Time @ 77°, 50% RH:
Temperature and humidity dependant
Touch: 1 hour Recoat: 4 hours
COMPOSITION
Moisture Shield™ is a high solids paint primer that contains stain blocker, UV light protectants and preservatives.
COMPATIBILITY
Moisture Shield™’s water-based formulation offers uniform dispensability and is compatible with a wide variety of materials.
STORAGE AND HANDLING
Read the label and Material Safety Data Sheet for complete handling information before using this product.
PACKAGING
Moisture Shield™ is packaged in 5-gallon pails, 55-gallon drums, and 275-gallon totes. Thoroughly rinse containers before disposal.
|
